How To Spool A Baitcaster | Pro Tips

You might be thinking spooling a baitcaster could be harder, especially if you have previously taken in how to cast a baitcaster in the first place. 

How To Spool A Baitcaster

To your surprise, it’s much easier than you have even imagined. However, there are some tips and techniques that need to be followed to spool correctly without backlash and entanglement or most commonly known as line trouble. 

However, there are different fishing lines and thus the procedures are a bit different for each of them that needs to be studied individually in order to fish productively. 

Fishing line: 

Spoolish Backlash!!!

Before learning how to line a bait caster you must know about fishing lines since if you are new to fish, you might not be familiar with the different fishing lines and their different properties. 

Commonly, there are three types of fishing lines available in the market. Monofilament, fluorocarbon, and braid. Any pro angler would suggest you to go with the braid since it is the most trusted and vigorous line among all. 

However, there are some facts and truths about each line for how to string a baitcaster effectively that you need to know before buying. 

About monofilament and fluorocarbon are both plastic lines that are elastic as well and both have an upper hand due to their knotting abilities and cost price so as a beginner you should always be spooling a baitcaster reel with either of them. 

However, a braided line is specifically designed for pro anglers for casting at a larger distance since the line has the least diameter comparatively, and also can hold up to larger fishes without getting stretched and broken. 

The only difficulty with a braided line occurs when you gotta attach the line to the spool since the line is slippery and does not hold the spool. 

Though many people don’t know it with this trick, you can use the braided line with no difficulty at all. So, all you have to do is to reel the line initially with a monofilament to a few yards then knot it up with the braided line, and then use it. 

How to Tie Fishing Line to Baitcast Reel:

There are a lot may knots that you can tie to your fishing line. The most common ones are Palomar, arbor, and the uni knot. Palomar could be the easiest and the strongest knot for fishing.

Though fishing knot varies very much and you simply can’t use one for each and every knot. At the very start, you should go with the Arbor knot, and when you have to tri braid in between use the double uni knot.

For ensuring increased safety, you can tie the monofilament and braid with Fish N Fool knot while fluorocarbon with Triple Loop Knot.

How to put line on a baitcaster:

After learning about lines and knots, here we can start with putting a line on a baitcaster. 

Through the line guide of the baitcaster, start feeding the line. In this way, you can apply the tension to the line in the process. 

Learn the trick yourself.

When it reached the spool, turn the line over the spool and then tie the arbor knot. Now, cut the trim end. Here to check that your reel has holes or not,  if yes, then run the line through it and tie using an overhand knot otherwise you can simply tie the knot after wrapping it up with the spool. 

Now start reeling the line with the help of the handle. Make sure you keep the pressure constant otherwise it’ll leave spaces in between and doesn’t reel smoothly which will prolly cause backlashes

You need another person holding the spool on the other end or you can place the filled-up spool on the table or ground from where you can put the line to the baitcaster spool. 

Keep spooling the line until it reaches ⅛ of the spool mount and you’re done. 

How much line to put on a baitcaster:

The most common question that arises while spooling is, how much line to put on a baitcaster? Well, that depends on the reel size and variant as well as the fishing line that we have explained above. 

How much line to put on a baitcaster
There is something fishy about lines!

However, low-profile reels usually do not hold much of the line while round reels do and that is why they are preferred over low-profile reels for a longer cast. 

low -profile reels are available in 100,200,300, and 400 sizes and they can go from 100 yards of line to 200 yards depending on the size, and fortunately, you can get these reels even in under $50. Though it involves the weighting mechanism as well that deciphers that the smaller the size, the lighter the weight, and vice versa. 

The round baitcasting start offers mighty sizes that go all the way from 4000 to 7000 and allows for holding a max of 250 yards of the 20 pounds test line. 

NOTE: whatever size your reel is, do not forget to leave 1/8 inches of space from the top. In simple words, never fill the spool completely or your spool won’t be able to rotate smoothly and thus you won’t be able to cast as effectively as you want. 

Conclusion:

If you have till here, We are pretty sure that you have learned the basics of how to spool a baitcaster or how to put the line on baitcaster. Though, if you are getting started, it would be quite typical for you to remember all of these. 

Nevertheless, with time and practice, you will find it way easy that how to respool a baitcaster and for a plus point you can have these sum up guidelines of the aforementioned process. 

In the first place, Figure out the reel size, choose the line, learn about the knots, take care of the line guide. Finally, reel it up and put all the tension that you have in your to your line and you are ready to ace the fishing place! 

Hope you find it easy and understandable, good luck!

Clinton Shannon

Leave a Comment